MEP · Semi-automatic band saw machines · Metal cutting saws
MEP SHARK 282 SXI EVOsemi-automatic band saw
- Max. cut at 0°
- Ø250 / 280×220 mm
- Mitre cut
- –45°…+60°
- Speed
- 36/72 m/min
- Power
- 1.5–1.8 kW
The MEP SHARK 282 SXI EVO is a SHARK SXI semi-automatic band saw for tubes, profiles and beams. The operator loads the workpiece and starts the cycle, then the cut runs without them. At 0° it takes Ø250 mm round bar or a 280×220 mm rectangular section, mitre −45°…+60°, both ways, and round bar up to Ø230 mm at +45°. Blade 2950×27×0.9 mm, 36/72 m/min, 1.5/1.8 kW drive.
| Brand | MEP |
| Country of manufacture | Italy |
| Series | SHARK SXI |
| Saw type | Band type |
| Operating mode | Semi-automatic |
| Category | Metal cutting saws · Semi-automatic band saw machines |
| Working area | |
| Max. cut at 0° | Ø250 / 280 × 220 mm |
| Maximum cut at +45° | Ø230 mm |
| Mitre cut | –45°…+60° |
| Drive and output | |
| Speed | 36/72 m/min |
| Power | 1.5/1.8 kW |
| Tooling | |
| Blade | 2950 × 27 × 0.9 mm |
Additional specifications
Specifications are taken from the LUNA 2026 catalogue (MEP data). The final configuration, blade and equipment are confirmed in the technical quotation.
