Home / Catalog / Wire processing equipment / Chain-link fence machines

Chain-Link Fence Machines

Three Demirci chain-link machines: the ADF3 HS automatic at 240–320 m²/h, the ADF3 Classic at 120–160 m²/h and the manual MF3 at 60 m²/h.

Wire processing equipment

3 MODELS · 3D
SCROLL — the machine assembles · DRAG — rotate
03 / Models in category

Choose a model

Selection guide

How to choose a chain-link machine

All three machines weave the same chain link: a wire spiral is threaded into the previous one and the web is wound into a roll. Their mesh and wire ranges are almost the same, so the choice comes down to production volume — to pace, power and how much work is left to the operator.

The three machines side by side

MachineOutput (70×70 mm)Mesh and wireControls
Demirci ADF3 HS — fully automatic240–320 m²/h, 7.7 kW25×25–105×105 mm, wire 1.5–4.1 mmSiemens PLC, 7″ panel, servo motors
Demirci ADF3 Classic — fully automatic120–160 m²/h, 3.6 kW25×25–105×105 mm, wire 1.5–4.1 mmfunctional panel with speed adjustment
Demirci MF3 — manual with PLC60 m²/h, 2.32 kW20×20–85×85 mm, wire 1.4–4.0 mmPLC, 7″ touch panel, servo motor

What only the manual MF3 can do

Demirci MF3 looks like the simplest machine, but it covers two ranges the automatics do not: a mesh from 20×20 mm (the ADF3 minimum is 25×25 mm) and a web width from 0.3 to 6.1 m. It also weaves grass wire at 10–30 m²/h — so it makes opaque fencing too, not only plain chain link.

What stands next to the machine

A roll from the machine can be sold as it is, or it can be compacted — for that the compact roll machine is placed next to it: its 260–320 m²/h just covers the ADF3 HS automatic. Coloured wire is made on the PVC coating line, and to keep the machine from stopping when a coil runs out, wire ends are joined by butt welding. The full line-up is in the wire processing section.

Not sure which model fits?

Send your part parameters — we'll select and quote.

Call