Home / Catalog / Industrial washing machines / Chamber washing machines

Chamber Washing Machines for Parts

KSP cabinet washers: WM machines with a rotating basket, HPWM cabinets at 60–130 bar, UWM ultrasonic units and DPF cleaning systems.

3D overview of KSP industrial washing machines

31 MODELS · 3D
SCROLL — the machine assembles · DRAG — rotate
31 / Models in category

Choose a model

Selection guide

Cabinet washers: basket, pressure or ultrasound

This is the base section of the catalog: parts are loaded into the chamber as a batch, the machine runs a cycle and stops. Inside the section there are four different principles, and the choice is between them.

WM series — a rotating basket and hot water with detergent at 2.5–3 bar: the KSP WM650 with a Ø550 mm basket and a 150 kg load, then the WM1000 and WM1250 (Ø900 and Ø1150 mm), while models from the WM1500 up are front-loading, to Ø1850 mm and 850 kg. HPWM cabinets wash with a jet at 60 bar, and the Eco versions at 80–130 bar; the HPWM EVO adds a brush. UWM ultrasonic machines run from the KSP UWM600 at 75 kg to the UWM1300 at 400 kg. Separately there are DPF particulate filter cleaning units and the MW900 manual brush washer.

If rinsing and drying are needed in the same machine, see the multi-stage systems; for a flow of identical parts, the tunnel machines. How to compare washing equipment is covered on the washing machines.

Cabinet washers in the catalog

ModelTypeLoadPressureTemperaturePower
KSP WM650WM top-loading washer150 kg2.5 bar0–80 °C7.5 kW
KSP WM650-LWM top-loading washer150 kg2.5 bar0–80 °C7.5 kW
KSP WM850WM top-loading washer150 kg2.5 bar0–80 °C11 kW
KSP WM1000WM top-loading washer300 kg2.5 bar0–80 °C11 kW
KSP WM1250WM top-loading washer450 kg2.5 bar0–80 °C19.5 kW
KSP WM1500WM front-loading washer650 kg2.5 bar0–80 °C21 kW
KSP WM1750WM front-loading washer750 kg2.5 bar0–80 °C24 kW
KSP WM2000WM front-loading washer850 kg2.5 bar0–80 °C31.5 kW
KSP HPWM800HPWM high-pressure cabinet washer70 kg60 bar0–50 °C12 kW
KSP HPWM1100HPWM high-pressure cabinet washer100 kg60 bar0–50 °C12 kW
KSP HPWM800-ACHPWM high-pressure cabinet washer70 kg60 bar0–50 °C12 kW
KSP HPWM1100-ACHPWM high-pressure cabinet washer100 kg60 bar0–50 °C12 kW
KSP HPWM EVO-S1HPWM EVO high-pressure cabinet washer with brush300 kg60 bar0–50 °C17.85 kW
KSP HPWM EVO-S2HPWM EVO high-pressure cabinet washer with brush400 kg60 bar0–50 °C17.85 kW
KSP UWM600Ultrasonic UWM75 kg—0–80 °C5.25 kW
KSP UWM800Ultrasonic UWM150 kg—0–80 °C9 kW
KSP UWM900Ultrasonic UWM250 kg—0–80 °C10.5 kW
KSP UWM1300Ultrasonic UWM400 kg—0–80 °C19.5 kW
KSP UWM1300-SUltrasonic UWM400 kg—0–80 °C21 kW
KSP MW900Manual brush MW50 kg1.5 bar—5 kW
KSP DPF-S900DPF filter cleaning250 kg7–10 bar (air)—20 kW
KSP DPF1800-FDPF filter cleaning250 kg7–10 bar (air)—27 kW
KSP DPF1800-PRODPF filter cleaning250 kg7–10 bar (air)—27 kW
KSP DPF1800-PREMIUMDPF filter cleaning250 kg7–10 bar (air)—27 kW
KSP WM1000-EcoWM top-loading washer300 kg3 bar0–90 °C11 kW
KSP WM1250-EcoWM top-loading washer450 kg3 bar0–90 °C22.5 kW
KSP WM1500-EcoWM front-loading washer650 kg3 bar0–90 °C21 kW
KSP WM1750-EcoWM front-loading washer450 kg3 bar0–90 °C22.5 kW
KSP HPWM800-EcoHPWM high-pressure cabinet washer70 kg80–130 bar0–55 °C9 kW
KSP HPWM1100-EcoHPWM high-pressure cabinet washer120 kg0–130 bar0–55 °C9 kW
KSP UWM MULTIWASHUWM MULTIWASH multi-tank ultrasonic line————

Questions and answers

Top or front loading?

Top loading suits parts lowered in by crane or hoist, as on the WM650–WM1250. Front loading is for a basket that rolls out and parts placed by hand or trolley, as on the WM1500 and larger. The choice depends on how parts move around your shop.

When is ultrasound needed?

When the dirt sits where a jet cannot reach: in blind passages, threads, nozzles, screens and on small precision parts. Ultrasound acts on the whole wetted surface at once, so complex geometry is not an obstacle.

Not sure which model fits?

Send your part parameters — we'll select and quote.

Call